- May 15, 2020
Top 3 Types of Oil Tanks: A Complete Guide
If your firm or factory needs oil or fuel tanks, you must have a clear idea about the different styles of oil storage tanks.
In this blog, we’ve discussed the different types of oil tanks available in the market.
Oil Storage Tank Materials
Oil storage tanks are made up of three types of materials –
1. Steel – Steel tanks are inexpensive and widely used in factories across the United States. They can be used for both underground and above-ground storage. However, these tanks must conform to strict manufacturing and construction standards.
2. Fiberglass – Fiberglass tanks are sturdy and durable. Best of all, these are resistant to rust, leakage, and sediment. Similar to steel, these tanks can also be used for underground and above-ground storage.
3. Combination – Combination storage tanks use a double-walled and are the most sturdy and reliable storage option. The inner tank is made up of thick polyethene composite, while the outer tank is made up of galvanized steel. Both comply with pressure tests and construction standards laid down by the Federal Government.
Types of Oil Tanks
1. Above-ground Indoor Storage Tanks:-
These oil tanks are large-sized containers that are installed in basements, utility rooms, or garages.
Typically, these tanks have a capacity to hold 275 gallons of fuel. However, smaller and larger models are also available, with a storage capacity of about 160 gallons and 400 gallons respectively.
The size of the tank depends on the quantity of fuel required, frequency of furnace usage, and the climate in the geographical area where the tank is required to be installed.
Larger tanks are required to be refilled less often but require a larger purchase of fuel whenever filled.
Smaller tanks, on the contrary, run out of fuel frequently, but easily cater to the needs of the factory if the requirements are minimal and furnace usage is low.
2. Above-Ground Outdoor Tanks :–
These tanks are installed near the factory, either at the side or adjacent to the facility. They tanks are usually installed in areas where municipal utility lines don’t reach.
The best part about these tanks is that they are capable of withstanding extreme weather, including but not limited to hard storms, snowfall, and severe climatic conditions.
Typically, these tanks have a capacity of 275 gallons, but smaller or larger variants are also available.
3. Underground Tanks :-
As the name suggests, these oil tanks are buried underground along with the supply pipes.
The fill pipe, where the tank is refilled, is placed above ground at a point where it can be easily accessed by those who refill the tanks. Usually, they are larger than above-ground storage tanks and can typically hold 550 to 1000 gallons of fuel.
Most oil storage tanks are either cylindrical or oval. Oval tanks are either installed vertically or horizontally, while cylindrical tanks are installed horizontally. These tanks are specifically designed to fit in spaces of various sizes.
So, here were the three types of oil tanks. Get in touch with an expert to know which type would best suit your purpose.
- Industrial tanks
- oil storage tanks
- oil tanks
- Types of oil tanks
- Above Ground Fuel Tanks
- Above Ground Storage Tanks
- Above Ground Water Storage Tanks
- Chemical storage Tanks
- Diesel Fuel Storage Tanks
- Diesel Storage Tanks
- Exernal FloatingRoof Tanks
- Farm Water Tank
- Fiberglass Oil Tanks
- Fiberglass Septic Tanks
- Fiberglass Underground Fuel Storage Tanks
- Field Erected Tanks
- Fuel tank
- Industrial Chemical Storage Tanks
- Industrial Storage Tanks
- Natural gas
- Oil Storage Tanks
- Peracitic Acid
- Petroleum Tanks
- Residential Water Storage Tanks
- Sodium Hydroxide Storage Requirements
- Sodium Hypochlorite Storage Tanks
- Storage Tanks
- Sulfuric Acid Tanks
- UnderGround Storage Tanks
- Water Storage Tanks